Puffed Sticks Machine-manufacture,factory,supplier from China

Equipment introductionDLG90 type extruder is mainly used to process all kinds of twice-puffed food and three-dimensional puffed food. The raw materials used are various starch, flour and potato whole powder.

This Fried cheetos kurkure niknak processing line can use corn grits instead of the powder material to produce the irregular stick sanack. This extruder is specially designed with one screw only for such cheetos, kurkure, or niknak. After shaped from extruder, the products will be sent into the rotary sifter to take down extra grits sticky on the surface. The waste grits can be collected and used again as raw materials. So this processing line can lower down the production cost.

OverviewThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, oil rejection, and lifting. A series of actions are controlled by PLC centralized automatic control, which makes the control accurate and reliable, greatly improves the production efficiency, and saves a lot of human resources.

This puff snack making device can use corn, rice, and distinctive grain powder as uncooked materials to deliver right away puffed snacks in variou shapes, collectively with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very well-known within the marketplace.

This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market.

Equipment introductionSLG35-A twin-screw extrusion puffing tester is a puffed food equipment suitable for research, teaching and formula research and development, which is developed by using advanced twin-screw extrusion technology and combined with our company's rich experience in puffed food technology research for many years. The characteristics of the equipment are: the screw has self-cleaning function, high efficiency of material pushing, and good shearing and homogenizing effect of material.

This puff snack making device can use corn, rice, and special grain powder as uncooked materials to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and appealing which is probably very famous in the marketplace.

This puff snack making device can use corn, rice, and other grain powder as raw substances to provide immediately puffed snacks in variou shapes, along with chip, ball, ring, stick, flake, flower, and so forth. after dried and flavroed, the snacks are crispy and tasty which are very popular inside the marketplace.

Introduction to FLS Snack Products Cooling Conveyor Machine:FLS Snack Products Cooling Conveyor Machine is a supporting equipment for the oven, which is used to cool and transport baked materials. This machine adopts stainless steel mesh belt driven by chain to transport materials.

This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market.

Equipment introductionSLG85-A large-scale twin-screw extruder is a puffed food equipment developed by using foreign advanced twin-screw extrusion technology and combined with our company's rich experience in puffed food technology research for many years.The equipment adopts stable and reliable frequency conversion speed regulation system and precise pressure sensing system, which makes the operation more convenient and accurate. The spiral part adopts a specially designed screw structure such as two co-rotating, double-ended arc grooves and kneading blocks.

Equipment introductionSLG72-A large-scale twin-screw extruder is a puffed food equipment developed by using foreign advanced twin-screw extrusion technology combined with our company's rich experience in puffed food technology research over the years.The equipment adopts a stable and reliable frequency conversion speed regulation system, which is more convenient to operate, and the data display is more accurate and intuitive. The spiral part adopts a specially designed screw structure such as two co-rotating, double-ended arc grooves and kneading blocks.

This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market. This Puff Snack Machine Is Characteristics Of Simple Opeation, Reasonable Structure, Low Consumption, And High Efficiency, Which Make It The Best Choice For Medium Factory.Schematic diagram of production line

This puff snack making machine can use corn, rice, and other grain powder as raw substances to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very famous in the marketplace. this puff snack machine is characteristics of easy opeation, reasonable shape, low intake, and excessive performance, which make it the nice choice for medium production unit.Schematic diagram of production line

Equipment introduction This machine is a special equipment for pasta products such as pizza rolls. The raw materials used are various starch, flour and potato whole flour. Its characteristics are: the product is beautiful in appearance and delicate in taste. The equipment has reasonable structure, high output, low energy consumption, small footprint, easy operation and maintenance.   technical parameter: Total power: 10.12KWHost power: 7.5KWRotary cutting power: 0.37KWFeeding power: 0.75KWProduction capacity: 70～80㎏/hDimensions: 1700×1000×1800mm

This puff snack making system can use corn, rice, and other grain powder as uncooked materials to deliver proper away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and attractive which is probably very famous within the marketplace.

Equipment introduction:SLG65—C type double-screw extruder technical parametersScrew diameter: Φ65mmScrew speed: 0～250rpmzProcessing capacity: 80～120kg/hTemperature control range: 0～399cMotor power: 22kwMachine center height: 1020mmDimensions: 2400×960×1800mmSLG65-C type double-screw puffing machine is a puffing food equipment suitable for my country’s national conditions, developed by using the international advanced double-screw extrusion puffing technology, combined with our company’s rich experience in puffed food technology research for many years.Host FeaturesThe host adopts a stable and

A technical performance:The production line can produce snowflakes, meringues, and cereals. It is an integrated machine for continuous spreading, shaping and cutting. It adopts frequency conversion adjustment, and the cutting size is accurate and the molding squareness is good. The whole machine is produced continuously without manual connection in the middle.

OverviewThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, oil rejection, and lifting. A series of actions are controlled by PLC centralized automatic control, which makes the control accurate and reliable, greatly improves the production efficiency, and saves a lot of human resources.

　　　The core filling snack production line developed by our company is an advanced production line, which uses advanced co extrusion technology to extrude two kinds of products with different texture and taste on a twin-screw host at the same time. It can process a variety of raw materials at the same time, such as Rice noodles, syrup, fruit paste, etc., and process them into a variety of sandwich rice fruit products, such as McChicken pieces, cocoa desserts, sandwich rice fruit, maishao, banana crisp, rice fruit, etc.

Ⅰ. OVERVIEWThis machine is the auxiliary equipment of the twin-screw puffed food production line, which pulls and seals the food blanks extruded from the main machine. The shape is similar to a pillow, so it is called a pillow bag shaping machine.The machine is reasonable in design, compact in structure, easy to operate, and can meet the requirements of different parameter states of customers.Ⅱ. SCHEMATIC DIAGRAM OF THE EQUIPMENTⅢ. INSTALLATION INSTRUCTIONS1. According to the position of the production line, arrange the equipment on a flat and solid ground;2.

Breadcrumb is specifically used for fried beefsteak and bird as frying dressing. this line is specially designed and evolved to perform from the fabric to very last shaping robotically with much less manpower, with out waste,lower production price, and better manufacturing performance.

This puff snack making machine can use corn, rice, and other grain powder as uncooked substances to produce immediately puffed snacks in variou shapes, such as chip, ball, ring, stick, flake, flower, and many others. after dried and flavroed, the snacks are crispy and tasty which might be very popular in the marketplace. this puff snack machine is characteristics of simple opeation, reasonable shape, low consumption, and excessive efficiency, which make it the best preference for medium manufacturing unit.Schematic diagram of production line

This Double-screw fried wheat flour snack processing line uses double screw extruding technique to replace the traditional steam booling process with high efficiency and no pollution without a boiler. The raw material can be total whear flour, or mixing with corn powder, rice powder, or others. By changing the moulds, the products can be in different shapes. After fried and flavored, the final snacks will be crispy and tasty. This line has features of continuous working, stable performance, and reasonable design.Schematic diagram of production line